Benefits
Saves time and reduces installation mess
No need for tile adhesives
Helps prevent additional moisture during installation
No drying times required
No cleaning of mixing tools or materials needed
Installation
Ensure the subfloor is dry, clean, level, and load-bearing before installation
Complete any repairs prior to installation
Measure surfaces and pre-cut membrane sections before application
Clean walls using a brush or vacuum only — do not use a damp cloth
Apply a suitable primer to prepare the surface
Seal wall-to-floor transitions using sealing tape and corners
Gradually remove the backing paper while applying the membrane
Use a trowel to firmly press the membrane and remove air pockets
Overlap joints by 5–8cm using sealing tape to ensure a watertight seal
Repeat the process as required for walls and floors
Tiles can be applied directly onto the membrane
Apply only at temperatures above 15°C for optimal adhesion
